MAINTENANCE

What CCTV Servicing include -     Check history of CCTV system since last maintenance service    Visual inspection of all major CCTV components including cabling & connections where accessible for signs of deterioration or damage   Check all CCTV control equipment (monitors, VCR, DVR, Multiplexer etc.)   Check and clean cameras, lenses and housings as necessary.   Check lenses for correct field of view and adjust as necessary   Check pictures for correct field of view and adjust as necessary.    Check and test remote signalling equipment (where fitted)   Check recording and playback quality   Check the satisfactory transmission of images to remote centre (where applicable)   Repair minor faults where necessary (additional costs may apply)   Retrain the users on the use of the CCTV system (if required maximum 1 hour)   Log all test results   Return the CCTV system to operational status subject to condition

What CCTV Maintenance cost - CCTV Maintenance Packages Small 1x Annual servicing up to 5 cameras excluding parts Technical help support 25% discount on call outs during contract period Payment by cheque or direct debit (annually) Please call for price 0800 145 5171 Meduim 1x Annual servicing 6 to 9 cameras excluding parts Technical help support 25% discount on call outs during contract period Payment by cheque or direct debit (annually) Please call for price 0800 145 5171 Large 1x Annual servicing 10 to 16 cameras excluding parts Technical help support 25% discount on call outs during contract period Payment by cheque or direct debit (annually) Please call for price 0800 145 5171 CCTV Repairs – Inspection call out from £75 + VAT plus parts and labour.

Intruder Alarm Maintenance

ClearView offer scheduled alarm system maintenance or one-off servicing depending on the type and specification of alarm system installed. During the inspection typically the following tests and adjustments are carried out:

• Thorough visual inspection of all major alarm components including wiring and connections
• Test power supply and battery charging rates
• Visual inspection and walk test all detectors
• Test operation of manually operated devices such as panic buttons
• Inspect, test and lubricate all bell boxes, sirens and speakers
• Check and test remote signaling equipment
• Carry out adjustments as necessary

Fire Alarm Maintenance

During Fire Alarm System maintenance all components are checked for satisfactory operation. All detector heads are cleaned and tested for sensitivity. Bell boxes are tested to ensure decibel levels are in accordance with current European standards.

Access Control System Maintenance

All systems and equipment is inspected and tested for satisfactory operation. Components are cleaned and lubricated as required.